From the makers of Equipment Maintenance Log — a maintenance log you keep by voice
How to Track Fuel for Construction Equipment
To track fuel for construction equipment, log every fill-up per machine with three numbers: gallons added, the hour meter reading, and the date. Divide gallons by hours worked between fill-ups and you get gallons per hour. Watch that number over time: a machine that suddenly burns 20% more than its usual rate has a problem — mechanical, operational, or fuel going somewhere it should not.
What to record at every fill-up
| Field | Example | Why |
|---|---|---|
| Machine | Excavator 2 | Fuel is tracked per unit |
| Date | Oct 14 | Matches job and invoices |
| Gallons added | 38 gal | The core number |
| Hour meter or odometer | 3,415 hrs | Needed for gallons per hour |
| Filled to full? | Yes | Partial fills skew the math |
| Who fueled | Mike | Questions later |
| Job or site | Elm St. lot | Job costing |
Filling to full each time makes the math simple: the gallons you add equal the gallons burned since the last full fill.
How to calculate gallons per hour
Take two full fill-ups in a row:
- Fill-up 1: full tank at 3,375 hours.
- Fill-up 2: added 38 gallons at 3,415 hours.
- Hours worked: 3,415 − 3,375 = 40 hours.
- Fuel burned: 38 gallons.
- Rate: 38 ÷ 40 = 0.95 gallons per hour.
For trucks, use miles instead: 61,350 − 60,980 = 370 miles on 42 gallons is about 8.8 miles per gallon.
One fill-up tells you little. Track the average over a month, and compare the same machine doing similar work.
Spotting waste
| What you see | Possible cause |
|---|---|
| Rate rises slowly over months | Dirty air filter, injector wear, low tire pressure, dragging brakes |
| Sudden jump on one machine | Leak, a different operator or job, fuel being siphoned |
| High fuel, low hours | Fuel logged to the wrong machine or taken off the site |
| Rate much higher than similar machines | Excess idling, wrong machine size for the job |
| Hour meter barely moves, fuel used | Meter broken, or the fuel is not going in that machine |
Idling is the quiet one. An engine idling through a long lunch still burns fuel and adds hours to the meter. Comparing gallons per hour with idle time (if the machine shows it) helps separate operating cost from waste.
Making the log stick
- Log at the pump or fuel trailer, not at the end of the day from memory.
- Fuel tickets and photos of the meter settle arguments later.
- Review per-machine rates once a month; nobody needs a daily report.
- Use the same hour readings for fuel and for service, so one log feeds both your fuel numbers and your engine hours maintenance schedule.
How to keep it going
In Equipment Maintenance Log, each machine or truck has its own chat. At the fuel trailer the operator says: "Filled up 38 gallons, 3,415 hours." For a truck: "Filled 42 gallons, 61,350 miles." The AI assistant saves the fuel, the reading and the date in that machine's log, and the same reading keeps your service reminders current. You can scroll a machine's fuel history to compare fill-ups. AI can make mistakes, so every entry can be reviewed and corrected. For the full list of what a log should hold, see what a maintenance log app should do.
FAQ
What is a normal fuel burn for an excavator?
It depends on size, engine and work. Compact machines often burn around one to two gallons per hour, larger excavators much more. Your own average for each machine is the most useful baseline.
How do I track fuel from a fuel trailer?
Log each machine fill-up separately from the trailer, with gallons and hours. Then compare the total of machine fills with what went into the trailer to spot losses.
Do I need fuel cards or sensors to track fuel?
No. A consistent manual log with gallons and hour readings is enough to find most problems in a small fleet.
How often should I review fuel numbers?
Monthly is enough for most small fleets. Look for any machine whose gallons per hour changed noticeably from its usual rate.
