From the makers of Equipment Maintenance Log — a maintenance log you keep by voice

Equipment Downtime Tracking

November 19, 2026 · 4 min read

To track equipment downtime, record four things for every stoppage: which machine, when it stopped, when it ran again, and why. Add the hour-meter reading and a one-line cause. A month of those entries shows which machines and which failures cost you the most, and gives you the numbers to price downtime in dollars.

What counts as downtime

Downtime is any time a machine is needed but cannot work. That includes breakdowns, but also scheduled service during a work day, waiting for a part, and a machine that runs but is held back by a safety issue. Planned service in the evening is not downtime; a Tuesday morning breakdown is.

Keep two categories separate:

  • Planned: services, inspections, scheduled repairs.
  • Unplanned: breakdowns, damage, anything that surprised you.

Unplanned is the number to attack.

What to record

Field Example
Machine Excavator 2
Date/time down Mar 14, 9:30 am
Date/time back Mar 15, 2:00 pm
Meter reading 3,860 hours
Cause Hydraulic hose burst
Waiting on Part from dealer
Repair cost Parts and labor

The "waiting on" field is the useful one. Teams often find that the repair took two hours and the machine sat for two days waiting on a part or a decision.

Simple downtime cost math

Downtime costs more than the repair bill. A basic estimate:

Downtime cost = hours down x hourly cost of idle machine and crew

Worked example. An excavator is down for 14 working hours. Suppose a replacement rental would cost 90 USD per hour of use, and the idle two-person crew costs 70 USD per hour combined. You choose to hold the crew:

  • Crew idle: 14 x 70 USD = 980 USD
  • Rental cover for 8 of those hours: 8 x 90 USD = 720 USD
  • Hose and labor: say 350 USD

Total: 2,050 USD for one hydraulic hose. These are example figures; use your own rates. The point is that a 40 USD hose on the shelf would have prevented most of that.

How to cut downtime

  1. Find repeat failures. If the same machine stops for the same reason three times, fix the cause.
  2. Stock the cheap, common parts. Filters, belts, a hose or two, fuses.
  3. Catch problems at the daily check. A seeping hose found Monday is planned work; found Thursday it is an emergency. See our daily equipment inspection checklist.
  4. Service on schedule, by hours. Overdue service is a leading cause of avoidable failures. The engine hours maintenance schedule explains how.
  5. Shorten the wait. Know your dealer's parts lead time and who to call.

Make it a habit

The best system is the one that takes ten seconds. In Equipment Maintenance Log, each machine has its own chat. Say "Excavator 2 is down, hydraulic hose burst, 3,860 hours" and later "Excavator 2 back running, replaced hose" and the AI assistant saves both as dated records in that machine's history. Photos of the damage stay in the same chat. AI can make mistakes, so entries can be reviewed and corrected.

FAQ

How do I calculate downtime percentage?

Divide hours the machine was unavailable by hours it was needed, and multiply by 100. Ten unavailable hours out of 200 needed is 5 percent.

What is a good downtime number?

It depends on the machine and work. Rather than chase a benchmark, track your own trend per machine and aim to reduce unplanned hours month over month.

Do I need software for this?

No. A shared sheet works if people actually fill it in. The hard part is the habit, which is why voice or quick text entry helps.

Should I track downtime for small tools?

Only if their absence stops work. Focus on the machines whose stoppage costs the most per hour.

Read next

Log your next repair by voice

Free on iPhone and Android. Sign in with Apple, Google or email. Say it — it is logged.