From the makers of Equipment Maintenance Log — a maintenance log you keep by voice
Fleet Maintenance Checklist
A workable fleet maintenance checklist has four layers: a daily walk-around by the operator, a weekly fluid and tire check, a monthly or hour-based service by a mechanic, and an annual inspection with records. Copy the tables below, assign an owner to each layer, and record every completed check with a date and meter reading.
Daily (operator, 5 minutes)
Done before the vehicle moves, by whoever is driving or operating it.
- Fluid levels: engine oil, coolant, hydraulic oil where applicable.
- Tires: pressure by sight, damage, missing lug nuts.
- Lights, horn, backup alarm, wipers.
- Brakes: pedal feel when you start rolling.
- Leaks under the unit.
- Mirrors, glass, seat belt.
- Anything new: noise, smell, warning light. Report it the same day.
For machines, see the daily equipment inspection checklist.
Weekly (driver or yard lead)
| Item | What to look for |
|---|---|
| Tire pressure | Gauge every tire, spare included |
| Battery and terminals | Corrosion, loose clamps |
| Belts and hoses | Cracks, fraying, wet spots |
| Washer fluid, DEF | Topped up |
| Grease points | On equipment with grease fittings |
| Cleanliness | Radiators, cab, load area |
Monthly or by hours/miles (mechanic)
Use hours for equipment and miles for road vehicles. Typical items:
| Item | Common interval (check your manual) |
|---|---|
| Engine oil and filter | By manual: miles for trucks, hours for equipment |
| Brake inspection | Monthly look, full check at each service |
| Air filter | By restriction indicator or manual |
| Fuel filter and water separator | Per manual |
| Steering and suspension | Play, worn bushings |
| Fluid analysis or top-up | Transmission, differential, hydraulics |
Annual (mechanic plus manager)
- Full safety inspection of every unit, documented.
- Brake system measurement and service.
- Cooling system and coolant condition.
- Exhaust, DPF or emissions items where the vehicle has them.
- Registration, insurance, and any required regulatory inspection for vehicles on the road.
- Review the year: which units cost the most to keep running?
Regulatory requirements vary by vehicle and state; confirm what applies to your fleet.
Who does what
| Layer | Owner | Record |
|---|---|---|
| Daily | Operator | Pass/fail, defects reported |
| Weekly | Yard lead | Tick and date |
| Service | Mechanic | Work done, parts, hours or miles |
| Annual | Manager | Inspection report |
How to track completion
A checklist nobody records is only an intention. The weak point is usually the second and third layer: services get done but nobody knows when. Whatever you use, capture four things each time: the unit, the date, the meter reading and what was done. Our notes on Excel versus a maintenance app compare the common ways to keep that record.
Keep it in one place
In Equipment Maintenance Log, every truck and machine has its own chat. The mechanic says "Truck 7, oil and filter, rotated tires, 128,400 miles" and the AI assistant saves it as a record. You can invite drivers and mechanics so everyone sees the same log, and the app reminds you about the next oil change based on logged hours or miles. AI can make mistakes, so entries can be reviewed and corrected.
FAQ
How often should a fleet vehicle be inspected?
Daily by the operator, with deeper service at set miles or hours and a documented annual inspection. Heavy-use units deserve shorter intervals.
Who should be responsible for fleet maintenance?
One named person per layer: operators for daily checks, a mechanic for service, a manager for oversight. Shared ownership usually means no ownership.
What records should I keep?
Date, unit, meter reading, work done, parts used and who did it. That is enough to schedule the next service and prove maintenance history.
Can a small fleet use the same checklist?
Yes. A three-truck business needs the same layers, only with fewer rows.
