From the makers of Equipment Maintenance Log — a maintenance log you keep by voice
Fleet Maintenance for a Small Business
A simple fleet maintenance program for a small business has five parts: a list of every truck and machine, a service interval for each (miles for trucks, engine hours for equipment), a daily check by the driver or operator, a record of every service and repair, and a 15-minute weekly review of what is due. You need a routine, not a maintenance department.
Why small fleets need a program
Without a program, maintenance happens when something breaks. That is the most expensive way to run a fleet: repairs cost more than service, breakdowns happen on the job, and a crew stands around while a truck sits on the shoulder. With a small fleet, one machine down can be a quarter of your capacity.
Step 1: List every unit
For each truck, trailer and machine, write down:
- Name or unit number your crew uses.
- Make, model, year, VIN or serial number.
- Current mileage or engine hours.
- Last known service and what was done.
Trailers and generators count. They break too, and they are the easiest to forget.
Step 2: Set service intervals
| Unit type | Measured by | Typical oil service | Check your manual for |
|---|---|---|---|
| Pickup / light truck | Miles | 5,000–10,000 miles | Oil life monitor, severe-service schedule |
| Medium/heavy truck | Miles + engine hours | 10,000–25,000 miles | DPF, brakes, annual inspection |
| Excavator, loader, skid steer | Engine hours | 250–500 hours | Hydraulic, drive and filter intervals |
| Generator | Engine hours | 100–250 hours | Load testing, calendar limits |
| Trailer | Miles + calendar | — | Brakes, bearings, lights, tires |
Use the "severe service" schedule if your trucks idle a lot, tow, or run short trips on dirt roads. Most contractor trucks qualify.
Step 3: Daily checks
Drivers and operators do a quick pre-trip or pre-shift check: fluids, tires, lights, leaks, brakes. Defects get reported the same day, with a photo. Our daily equipment inspection checklist has a ready-to-use list.
Step 4: Record everything
Every service, repair, fuel-up and defect goes into one record per unit: date, miles or hours, what was done, parts used, who did it. This is what tells you what is due, and what you show a buyer or a warranty rep later.
Step 5: A weekly review
Once a week, 15 minutes:
- Update current hours and miles for every unit.
- List anything due within the next 50 hours or 1,000 miles.
- Check open defects. Anything older than a week gets a date.
- Book shop time or parts for the coming week.
Common mistakes:
- Running everything on the calendar when usage varies wildly between units.
- One person holding all the knowledge in their head.
- A spreadsheet nobody updates; see when a spreadsheet stops working.
- Fixing defects without recording them, so the same problem keeps coming back unnoticed.
How to keep it going
Steps 4 and 5 are where small programs usually fail, because recording takes effort. In Equipment Maintenance Log, each truck and machine has its own chat, and drivers, mechanics and the owner share the same log. A driver says "Truck 12, oil change done at the shop, 61,350 miles," and the AI assistant saves it with the date. Reminders for the next oil change or inspection come from the logged hours or miles. AI can make mistakes, so entries can be reviewed and corrected. It runs on iPhone and Android, it is free to use, and team plans are available for larger fleets.
FAQ
How much should a small business spend on fleet maintenance?
It depends on the age and type of units. Track your own costs per unit for a year; the real value is seeing which unit costs far more than the others.
Should I do maintenance in-house or use a shop?
Many small fleets do daily checks, greasing and simple services in-house, and send larger work to a shop. Either way, record the service in your own log.
What records should I keep for each vehicle?
Service and repair history with dates and mileage or hours, inspection records, defects and how they were fixed, plus purchase and warranty documents.
How do I get drivers to report problems?
Make reporting take seconds and act on what they report. If defects are ignored, drivers stop reporting them.
