From the makers of Equipment Maintenance Log — a maintenance log you keep by voice

How to Calculate Fuel Consumption per Hour

November 19, 2026 · 4 min read

Fuel consumption per hour equals the gallons you added divided by the engine hours worked since the last fill. Fill the tank to the top, run the machine, fill it to the top again, note how many gallons it took and how many hours passed on the meter. Gallons divided by hours is your gallons per hour (gph).

The formula

gph = gallons added at refill / engine hours since the previous refill

Both fills must be to the same level, for example to the top of the neck. The gallons you add the second time equal what the engine burned in between.

Worked example

An excavator is filled to the top at 1,200.0 hours. Eight days later it is filled to the top again at 1,262.5 hours and takes 281 gallons.

  • Hours worked: 1,262.5 minus 1,200.0 = 62.5
  • Fuel used: 281 gallons
  • Consumption: 281 / 62.5 = 4.5 gph

To get cost per hour, multiply by your fuel price. At a fuel price of 4 dollars a gallon, 4.5 gph costs 18 dollars per engine hour.

Typical ranges by machine class

Real consumption depends on load, so treat these as rough ranges and build your own baseline.

Machine class Rough range
Mini excavator 0.7 to 1.5 gph
Skid steer or track loader 1.5 to 3 gph
Backhoe loader 2 to 3.5 gph
20-ton excavator 3.5 to 6 gph
Wheel loader (mid-size) 4 to 8 gph

Light work such as idling or moving material gently sits at the low end. Heavy digging or pushing in hard ground sits at the high end.

Common mistakes

  • Not filling to the same level. A half-filled tank gives a wrong number. Always fill to the top for measurements.
  • Using the wrong hours. Use the engine hour meter, not the days you think it ran.
  • Mixing fuel from cans. Log every can, or the gallons will not add up.
  • Looking at one number. One refill can be off by 10 to 15 percent. Use an average over several fills.

How to track it over time

Write down each fill with the machine, date, hours and gallons, then calculate gph each time. Compare it to the machine's own average. If gph rises 15 to 20 percent for the same kind of work, check air filter, injectors, hydraulic overheating or a dragging brake. Fuel that disappears faster than hours explain can also point to leaks or theft. For a fuller method, see how to track fuel for equipment and our engine hours vs miles explanation.

Doing it without a spreadsheet

In Equipment Maintenance Log, the operator can say "added 40 gallons, 1,262 hours" in the machine's chat. The AI assistant saves the fuel, the hours and the date together, so the history for that machine is in one place and you can see how the numbers change. Entries can be reviewed and corrected, because AI can make mistakes.

FAQ

What is a normal fuel burn for a skid steer?

Commonly 1.5 to 3 gallons per hour, depending on size and load. Compare against your own machine over several fills rather than a general number.

Why does fuel use change between jobs?

Load, idle time, ambient temperature and attachments all change it. A machine idling a third of the day will show a lower gph per hour of work than one digging all day.

Can I calculate it from the tank gauge?

Only roughly. Fill-to-full measurements are far more accurate than a gauge.

How do I handle a machine without an hour meter?

Track days and estimate hours, or install a meter. Without hours, per-hour numbers are guesses.

Read next

Log your next repair by voice

Free on iPhone and Android. Sign in with Apple, Google or email. Say it — it is logged.